Ask Experts Questions for FREE Help !
Ask
    ngogi1's Avatar
    ngogi1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2008, 11:10 AM
    Fan do not turn on for Gas Heat
    I have Gas heat/AC unit. I just installed HoneyWell RTH6300B thermostat. I have four wires from my old thermostat(G, W, Y, R). On new honeywell it has fith connection Rc. I connected all wires as instructed and jumpered R to Rc. Both gas heat and AC working however Fan only coming on for AC not for heat. Currently Fan setting is "Auto" How can I fix this fan issue for gas heat. By the way my Unit is York M NO: G/VA036SA. I matched wires on Unit to thermostat. Please help how to fix fan issue for gas heat.
    amsteube's Avatar
    amsteube Posts: 75, Reputation: 6
    Junior Member
    		  
    #2

    Dec 2, 2008, 01:39 PM
    Here is the first thing I would do. I would reset the thermostat to it's default settings. Here is how to do it:

    1. Press Set Clock/Day/Schedule

    2. Press Set Schedule

    3. Hold Done and Next down at together for about 5 seconds.

    Now leave all the settings alone. Make sure the thermostat is set to Heat and that fan is on Auto. Turn the heat up so that it kicks on and see if the fan responds.

    Aaron
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox heat turn off and turn back on to work [ 2 Answers ]

I have a lennox heater I have to turn it off and turn it back on to get it to heat. What is wrong and how do I fix it.

Heat blower does not turn - Air Handler does not turn on for heat [ 7 Answers ]

I have an Energy Kinetics System 2000 boiler. It is hooked up to two different zones (two different air handlers). Zone 1 (main house) when turned on at the thermostat clicks and calls for heat, the boiler starts for a bit but the fan/blower never kicks on. Zone 2 (master bedroom) works just...

Heat Pump blower, and heat, won't turn off- not contr. Bd. [ 0 Answers ]

I've read about blowers (heat pump) that won't shut off, no matter what done to thermostat, and the cause typically being a faulty control board, and/or fan relay on contl. Board. I replaced board, as tech removed green wire to demonstrate it's fault (didn't turn blower off), but tried a brand new...

Heat won't turn off [ 1 Answers ]

My thermostat is on off, but the heat is on, and I can't get it to turn off. Also it says sory, battery, I put new batteries in but it still says the same thing. I want to turn air on, but only heat will stay on. What is wrong and what can I do?? :confused: :confused:

Heat won't turn off [ 3 Answers ]

I have a ul electric furnace that works fine other than it won't turn off. I have to turn of the main power in order to turn it off. I read that this could be the relay. If so how do I replace it if not what could be the problem. Please help Thanks

View more questions Search