Ask Experts Questions for FREE Help !
Ask
    bassman36's Avatar
    bassman36 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 9, 2010, 11:39 AM
    Fix my carrier furnace
    My trouble light says to clean the flame sensor. I'm trying to locate the flame sensor to clean it?

Check out some similar questions!

Carrier furnace: limit switch fault furnace has ignition but blower will not come on? [ 2 Answers ]

Board says it is a limit switch fault Furace goes into pre ignition, fan comes on and sometimes even the main burner ignites, but the blower will not come on... is this the blower motor or could this be a switch somewhere?

Carrier furnace (58 SXC 080) blower keeps running at times. Replace now or fix? [ 0 Answers ]

We have an 18-year old Carrier Weathermaker 58 SXC 080. Twice the blower has kept running after the temperature has been reached and the flames have gone out. The house temperature goes down as the furnace blower blows cold air through the house. Turning off the thermostat does nothing to stop...

Inducer motor hums on carrier how do I fix it [ 3 Answers ]

Inducer motor on Carrier furnace just hums any suggestions?

Carrier Weather Maker 800 need minor fix [ 4 Answers ]

I had a maintenace contract for my Carrier Weather Maker 8000. It was working perfectly. The maintenance contractor is always trying to sell me either a new air conditioner or a furnace because the units should be "very old". Actually they are eight year old and are working perfectly. Last visit...

OLD Carrier heater. Replace of fix? [ 2 Answers ]

Hello! I have a Carrier 58G01002A gas furnace in the basement. PG&E came out and said that the Limit Switch is out and needs replacing. A friend was by and said some of the ducting was patched with an asbestos material. Should I fix the limit switch and ducting and continue using the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.