 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have Maple Chase Thermostat that cuts the heater on then off about 2mins. Later.
The thermostate is about 17 year old. I can set it for the heater it will come on fire up then cut off about 2 minutes later and repeat this cycle. How do stop this so I can warm up my home. The furnace is fine it just does not stay on long enough heat the home. Help
|
||||
Check out some similar questions!
Replacing maple chase thermostat with ritetemp thermostat model # 6030
[ 0 Answers ]
Replacing maple chase thermostat with ritetemp thermostat model # 6030
Maple chase thermostat heater works but at temp keeps turning off and on blowing cold
[ 0 Answers ]
Maple chase thermostat heater works but at temp keeps turning off and on blowing cold
Maple Chase Thermostat
[ 3 Answers ]
Hello, My thermostat is reading low battery. I replaced the battery and it still reads the same and to make matters worse the AC unit is not working. The directions say check and see if the fuse has to protect system. This is where the confusion takes place, my knowledge on this stuff is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
