 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem 1970s-ish to a Hunter 44260
Old wires
W2 -> jumped to E = white wire Y = Yellow wire G = Green wire R = Red wire B = Light Blue wire X = Tan wire I think it should go, WB = heating = White Y1 = heat pump compressor = Yellow G = fan = Green Y/O = air conditioning compressor = Light Blue RH (24 volt) already jumped to RC (red 24 volt cook) = Red wire into RH Now I have the Tan wire left over. What am I missing? |
||||
Check out some similar questions!
1970s-ish scary movie that I vaguely remember from childhood about a family tormented by a man. The father "kills" the man and puts his body in a well, but later discover he is gone. The mother receives a flower box with an arm in it with son's ring. I think it ends with a fight scene on a boat....
Replacing Thermostat from a iNVENSYS 9420 to the Hunter 44260. I have 7 wires coming from the wall. Tan, Red, Orange, Green, Blue, White, Yellow The old had L,C,R (Tan to C, Red to R) Y2, Y1,E,W2,G,O,B (Yellow to Y1, Orange to O, Green to G, Blue to B, and White to W2) The New Hunter has G,...
Ok. So I changed my thermostat over the summer to a Hunter 44260 Programmable Thermostat. Had no problems over the summer using the AC. Now it's getting a little chilly and the heater will not turn on. When I switch the heater on, the AC condenser turns on but nothing is coming out of the vents...
Do you have a way of matching the color of the wires to the thermostat? I have 5 wires coming out of the wall, Green, Red, Blue, White, and Yellow.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
