Ask Experts Questions for FREE Help !
Ask
    Mousiememe's Avatar
    Mousiememe Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 27, 2010, 11:43 AM
    Electric hot point dryer caught fire
    I cleaned my hotpoint electric dryer vents every 2 - 3 uses. I never put too large a load in the dryer. My 7 year old dryer caught fire. When I opened the door to take out a few towels, I saw flames. The fire was contained inside the drum of the dryer. Any idea what could have caused this?
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
     
    #2

    Nov 27, 2010, 01:56 PM

    Yes, it was the lint that was caught in the venting to the outside. That must be cleaned out by hand every 6 months or so to ensure no lint build up resulting in a fire. More than likely your dryer is not repairable and you'll have to get a new one.

    Just cleaning the lint trap out each time is fine and dandy but you must clean the venting ductwork to the outside and also the outside flap area very thoroughly. Clothes give off more lint than is trapped in the lint trap within the dryer itself. You'd be amazed at how much lint is still able to get through the mesh in the lint trap.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electric dryer not getting hot [ 4 Answers ]

I have a Kenmore Heavy Duty electric dryer. The issue right now is that the dryer is not getting hot. I also feel as though the timer button may not be working properly. I googled this issue. Could this be the timer monitor? If so, how can I check it and how do I fix it. Any other...

Hot point dryer that tears clothes [ 1 Answers ]

I have a hotpoint electric dryer that puts small razor cuts in all my cotton tees and underwear but not in jeans or sweatshirts. What could cause the dryer to do this?

Kenmore electric dryer not getting hot [ 2 Answers ]

We have a kenmore electric dryer that will not heat up. We have checked the breakers and vents. It is only 2 years old. Could it be the heating element? Thanks.

Hot point electric range voltage [ 1 Answers ]

I purchased a 2 year old hotpoint electric range. Everything is working fine, but my electrition came by, put his meter on it and said that voltage was showing up on the steel panels. Not full voltage I believe something like 54 volts, enough to give a small shock. He says some voltage is seeping...


View more questions Search