Ask Experts Questions for FREE Help !
Ask
    acaca's Avatar
    acaca Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 21, 2010, 02:59 PM
    Wiring a 2pole,30 amp, 24 vac ac contactor
    Where does each wire go to a 2 pole ,30 amp ,24 vacm ac contactor
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #2

    Dec 20, 2010, 08:28 PM
    Do you really think that that is sufficient information to have that question answered? If you think so, you shouldn't be doing any work with line voltage. Electricity is dangerous to anyone who doesn't know what they are doing, and apparently you do not know what you are doing.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a ac contactor [ 8 Answers ]

Im having a problem figgering out where these wires go on my 2 prong contactor I have 2 violet wire and 2 red wires and a black and red wire I've looked and looked and found no giudes or diagrams showing where they go can anyone help me :confused:

I have a 2pole 30amp 20amp and a strait 15amp 2pole in the panel [ 3 Answers ]

I just bought a 21' 1977 trailblazer camper from my dad. I live in Phoenix, AZ. And this camper has no A/C. The wiring is exactly how I bought it so I will try to communicate as best as I can what I'm dealing with... Also I am a novice working with electrical as most of my trade work has been...

I have a train XE1000 I am changing the contactor but not sure if my wiring is correc [ 2 Answers ]

I have a trane xe 1000, I am changing a 2 pole contactor, 24V coil, but not sure if the wiring is correct. Anyone know how it goes?

Wiring new compressor contactor [ 3 Answers ]

Hi, thank you for looking at my post. My old contactor has 2 sets of 2 posts on one side (see picture http://www.arnoldservice.com/burnt%20contactor.jpg ) and my new contactor has 2 posts on opposite sides of the contactor (see picture http://images.grainger.com/images/products/5B133.JPG ). My...

Wiring my garage for a 230 VAC single phase welder [ 3 Answers ]

I am trying to wire a 220 outlet for my 230VAC single phase welder in my garage I have a 60a double breaker is it as simple as black and white w/ red stripe wires to breaker and green to ground? Thanks for any help


View more questions Search