Ask Experts Questions for FREE Help !
Ask
    boomtown013's Avatar
    boomtown013 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 3, 2010, 07:38 PM
    I have a train XE1000 I am changing the contactor but not sure if my wiring is correc
    I have a trane xe 1000, I am changing a 2 pole contactor, 24V coil, but not sure if the wiring is correct. Anyone know how it goes?
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Aug 4, 2010, 02:56 PM

    Not easy to explain in word and there are many differences, 1 or 2 capacitors, is there a wiring schematic in the unit?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Aug 4, 2010, 03:02 PM

    Refer to your notes, or photo, It wires the same as the old one. Power to line side, Load to load side, and the 2 small 24 volt control wires to Contactor coil.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a ac contactor [ 8 Answers ]

Im having a problem figgering out where these wires go on my 2 prong contactor I have 2 violet wire and 2 red wires and a black and red wire I've looked and looked and found no giudes or diagrams showing where they go can anyone help me :confused:

Hunter 44660 Thermostat to Trane XE1000 Heat Pump Wiring Problems [ 1 Answers ]

:(:( I have a Hunter 44660 Thermostat that I am trying to connect to my Trane XE1000 Heat Pump. I think I have the wires not correct. The pump wires are (yellow,Red,White,Orange,Black,Blue, Green) and the Thermostate has Y1, RH, RC1, RC1, RC, Y/O, W/B, G. Can someone help?

Wiring new compressor contactor [ 3 Answers ]

Hi, thank you for looking at my post. My old contactor has 2 sets of 2 posts on one side (see picture http://www.arnoldservice.com/burnt%20contactor.jpg ) and my new contactor has 2 posts on opposite sides of the contactor (see picture http://images.grainger.com/images/products/5B133.JPG ). My...

Wiring Thermostat Honeywell 8320U to Furnace-heat pump Trane XE78+XE1000 Combo [ 4 Answers ]

Hello, I have the following systems, each set is functional and individually controlled by two separate Trane Weathertron BAYSTAT240 thermostats. Set 1: Trane Weathertron: BAYSTAT240 Heat side Trane XE78: TUD080C936A1 (Date: 02/1993) Cooling side Trane XE78: TXCO36C4HPB0 (date H06) Heat...

View more questions Search