 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls...
I live in a Mobile Home as another question stated. I also have an Coleman Evcon Furnace with NO visible Model number and I'm looking to replace my filter. The old owner Cut to fit the their filter which doesn't fit that well! My measurements where odd compaired to other filters Ive had B4; they...
My Evcon 60000 BTU gas furnace has run for 5 months flawless. I have checked the drains, no plugs. I shimmed the back of furnace to allow better drainage. The second pressure switch keeps having water in it. Any other suggestions? Thank you in advance
I have a new evcon gas furnace, 60000 BTU that has ran flawless for 5 months. Now the pressure switch keeps filling with water, Why?
We have a Coleman Evcon DLAS075BDD furnace which keeps displaying error codes: 1-Ignition Failure and 4-Limit cycling. We have replaced the circuit board. Inspected the ignitor and the flame sensor and both appear good. Also have taken the exhaust vent/hood off and vaccuumed out any rust to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
