Ask Experts Questions for FREE Help !
Ask
    kathyjs's Avatar
    kathyjs Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 18, 2010, 02:47 PM
    Glacier bay faucet repair?
    I have a 8" spread glacier bay faucet with 2 handles. There is no water coming from the faucet. The water was running with no problem and just stopped.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #2

    Nov 18, 2010, 05:24 PM

    First thing remve the Aerator try it now, if good flow clean the screen in the Aerator install and check, if that will not fix your problem come back and will tell you the next step, Thanks.

    John
    kathyjs's Avatar
    kathyjs Posts: 2, Reputation: 1
    New Member
     
    #3

    Nov 19, 2010, 01:59 PM
    Comment on afaroo's post
    I have already checked the aerator. I took it off and cleaned it and the water still does not work. It is not the water pipe coming into the home because I have a hot water dispenser and it is still getting water and filling up that tank.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #4

    Nov 19, 2010, 02:06 PM

    Close the angle valves under the sink, disconnect the supply lines at the faucet now place the open end of the supply line in a pan slowly open the angle valve see if you have water flow if you do problem is with your faucet and will need to remove the cartridges and flush the debris out, if no water flow problem is with your angle valve stem washers, good luck.

    John

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Glacier Bay Faucet [ 6 Answers ]

We have a Glacier Bay Faucet installed in our kitchen in 2005. The neck swivel is very stiff. Is this normal, or should it swivel easily. Is this intended to be lubricated, and if so, how is this done? Thanks!

Repair glacier bay? [ 2 Answers ]

We took apart to clean screen of 6 month old kitchen faucet as had no water pressure. Now we can't reassemble. Help!!

Glacier bay faucets repair [ 1 Answers ]

I have a glacier bay faucet model nsf-61/9 that leaks. How do I get to the washers?

Glacier bay faucets repair [ 1 Answers ]

How do you disassemble the faucet

Glacier Bay Faucet [ 2 Answers ]

I have a two year old Glacier Bay kitchen faucet with pull out spray head. Recently the faucet is very difficult to pivot, so much so that the base plate on the sink twists when you try. I uninstalled, cleaned, lubricated and re-installed the faucet and it is still the same. My trip to Home...


View more questions Search