I have a 8" spread glacier bay faucet with 2 handles. There is no water coming from the faucet. The water was running with no problem and just stopped.

First thing remve the Aerator try it now, if good flow clean the screen in the Aerator install and check, if that will not fix your problem come back and will tell you the next step, Thanks.

John

I have already checked the aerator. I took it off and cleaned it and the water still does not work. It is not the water pipe coming into the home because I have a hot water dispenser and it is still getting water and filling up that tank.

Close the angle valves under the sink, disconnect the supply lines at the faucet now place the open end of the supply line in a pan slowly open the angle valve see if you have water flow if you do problem is with your faucet and will need to remove the cartridges and flush the debris out, if no water flow problem is with your angle valve stem washers, good luck.

John