 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My furnace is high effic ultra sx90
My furnace fires fine then blower runs for a min then shuts down I get 4 flashes high limit I replaced high limit doing samething vents are open and clear and exshaust is fine can it be pressure switch or what do you think
|
||||
Check out some similar questions!
Need parts schematic / users manual - armstrong sx90 furn. M. # guk 075d10-3a
The fan runs all the time but the unit never lights or heats. Where are the limit swithches that might need to be re-set?
I was just informed by my HVAC guy that my 10 yr old Armstrong Ultra SX90 furnace has popped a rivet on the heat exchanger. He says he is seeing this more regularly with these furnaces. He said he can replace the heat exchanger and told me to think about replacing the whole furnace because in the...
I just purchased this house and I am testing the furance. It looks very new. The AC works fine. The fan constantly run unless I turn power off to the furnace. Also, I just tried turning on the heat and the fan comes on high and it sounds like its running but no hot air.
Company installed a GMV95 gas furnace, using my old Honywell thermostat, single stage. I believe that the 2-stage furnace needs a 2 stage thermostat. As of now the old thermostat is connected with 4 wires. If I upgrade the thermostat to a Honeywell visionpro RTH8500, won't I need an addit. 2 wires...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
