 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Dish Network problems
We are hooked up to the Dish Network using one receiver with a splitter that allows it to be used with two TV's. Recently we have been having an issue that only one TV at a time will pick up the signal. The other cannot pick up a signal. This alternates between the two TV's. You can be watching one TV at night before bed and then get up the next morning and that TV is no longer working but the other one is. Does anyone have any idea what could be causing this? One Dish Network technician told me it was the LNB. Another said it wasn't the LNB but one of the cables connected to the splitter. I'm wondering if it isn't in the splitter itself. Any ideas?
|
||||
Check out some similar questions!
I am having major contractual problems with DishNetwork as they did not install my dish as promised in the way that was promised. I have tried to talk to two separate operators on the phone and one refused to let me speak to his supervisor and hung up on me, the other refused to give me a phone...
How do I hook up a dvr tyo dish network
Just out of curiousity, does anyone know why my dish network receiver makes a clicking noise few times during the day and night. It sounds like ti's powering on and off, but it does it when it's on and off. I was thinking maybe it's receiving update, but don't know.:confused: Thank you!
Where do I get the azimuth and angle of this network satellite transponders? I know I've seen a calculator before that asks for your zip code and gives you this info.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
