 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore 80 series dryer will not start
I have a Kenmore 80 series dryer, I have checked the voltage inside and out of the dryer, everything checks out, I checked the thermal fuse (good), door switch (good), the only thing I think is funky is when I checked the volage on one side of the push button I had 120 but when I pushed the button the volatage dropped out, and a momentary push button should not cause that making me believe I have a bad wire but my volatage doesn't drop at the terminal block, any ideas ?
|
||||
Check out some similar questions!
My Kenmore Series 90 dryer won't spin. When I hit the start button, I can hear a hum but it will not spin. How do I get to the belt to check it?:confused:
I have a Kenmore Heavy Duty 60 Series Sot Heat, Large Capacity dryer. After drying one load of laundry this morning, the dryer will not turn on. I can hear the timer running, it is on a serperate dial, but when I push the start button, nothing. I've checked the breaker box, plug, the drum still...
I would like to know how to remove the starter button from the dryer. I have removed the panel at the rear of the starter. Thank you
The dryer has worked for several years without a problem. But suddenly, without warning it won't start. There is no sound or action. I have checked the: Push to start switch Door switch Thermostat Thermo cutoff switch Thermal fuse Timer (This I only checked for continuity when set at 60...
600 series kenmore dryer won't start, when I push the button in
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
