 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat no power is this caused by zone valve
Honeywell thermostat has no power, I touch the wires together no power there, I can maunally open the zone valve and touch the black plastic button in the zone valve and the heat comes on otherwise thermostat isn't communicating with zone valve and has no power at it, what's the problem please help
|
||||
Check out some similar questions!
I have a 2 story house one thermostat downstairs(does not have different zone settings), with one lennox merit series gas heat system. The unit has a synchron zone valve in the ductwork, air passes through first zone(downstairs) to get to second zone(upstairs). The zone valve opens when unit is...
Have replaced the zone valve actuator, but it doesn't seem to be fixing the problem. What else can I do?
I noticed that my thermostat works fine and opens the zone valve for the basement. The problem is that it won't send a signal to the furnace to turn on and heat the water. I have no problem with the upstairs zone valve. It opens and turns on the furnace. Is this a wiring issue? Thanks...
Got a white rogers zone valve spinning and not stopping ,has my end switch burned out .
I recently replaced the power head on a WR zone valve. The valve is working properly but since the change the heat, although hot, lacks any force coming from the base boards. I lost a small amount of water from the boiler when I replaced the valve and am wondering if I lost too much. If so how...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
