Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My ge dryer won't start just a buzzing noise when I turn the start button
[ 3 Answers ]
It was working fine, just switched the loads and now just a buzzing noise when I turn the start button
Sears Kenmore Dishwasher start button won't start unit
[ 0 Answers ]
I have a Kenmore Ultra Wash dishwasher that will not start when pushing the start pad location. It will pump when put on the Cancel/Drain button, but will not start after that. It does have power, or the pump would not run during the Cancel/Drain cycle. The washer was purchased in Jan 20, 2006...
York P3HUD20N10401C not properly cycling
[ 10 Answers ]
York furnace would not maintain burner flame. When performing initial trouble shooting removed fan compartment panel disengaging safety switch. Cleaned flame sensor and furnace maintained flame for 4 days of cycling. Last night the fan compartment panel fell open... didn't get properly 'hooked'...
York 90+ won't fire
[ 17 Answers ]
Have a york 90+ upflow 100,000btu natural gas unit, won't fire unless I pull the tube from the combustion motor leading to the pressure sensor and put a vacume on it then it will fire and cycle, any suggestions ? View more questions Search
|