Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Electric furnace does not turn off at thermostat set point
[ 1 Answers ]
My thermostat seems to work by sending a signal to the electric forced air furnace to turn off at the temperature set point but the furnace continues to operate. Why is this?
Burnham Boiler not reaching Thermostat set point
[ 1 Answers ]
I have a Burnham series 2a gas boiler. This morning we woke up to a temperature of 66 degrees. The set point for the honeywell thermostat is 72 degrees. Since I have been home, the boiler will kick on and shut off when the temp reaches 67. I have increased the set point to 78 degrees and yet it...
Furnace shut off without getting to set point
[ 3 Answers ]
I have a Trane packaged unit model YCC036-SF-14A. It started not heating when heat was called for or just shutting off with out making set point. I thought is was the thermostat but with a new one same results. It will reset it I turn the thermostat off for 5 seconds then back on. I have no fault...
AC , Furnace, and Blower not turning on w/ thermostat set to Auto or On.
[ 20 Answers ]
Here's my issue. I cannot turn on either my AC, Furnace, or Blower from the thermostat. However, I can turn on the blower by manually pressing a 'Manual On' button inside the furnace. - AC is powered and was working a couple days ago. - Furnace was also working a couple days ago. - Found... View more questions Search
|