Ask Experts Questions for FREE Help !
Ask
    gerrymorrissey's Avatar
    gerrymorrissey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 8, 2009, 05:57 PM
    Electric furnace does not turn off at thermostat set point
    My thermostat seems to work by sending a signal to the electric forced air furnace to turn off at the temperature set point but the furnace continues to operate. Why is this?
    mike54's Avatar
    mike54 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Feb 4, 2011, 10:26 PM
    How do I know if my relay switch is bad on electric bryant furnace .furnace don't turn off when it reach it temp or could it be something more mike54
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat Wiring for Electric Furnace [ 2 Answers ]

I'm want to install the thermostat on our Electric Furnace. The wire leading to the furnace is a two wire (BLACK AND WHITE WIRES) It's heat only. The thermostat has a W and an R on the back of the stat. The furnace terminal has Y,W,O,C,G,F. The WO has a jumper between them? The W has a White...

Electric furnace won't shut off when thermostat satisfied [ 3 Answers ]

This is an old GE electric furnace. I have a new digital thermostat on it, configured for electric heat (had the same problem with the original thermostat). It will shut on and off perfectly for a few days, then I'll find that it's 85 degrees inside and the thermostat is set to 68, the furnace just...

Electric furnace won't turn off [ 1 Answers ]

Our electric furnace is set at 73 degrees. When the furnace comes on it runs great, until it reaches the 73 degrees. Than the furnace part shuts off and the fan continues to run until the temperature is down to about 70! My husband keeps saying it's because it is so cold outside, but today it was...

Thermostat can't turn off furnace [ 1 Answers ]

I just moved in a house, and pretty new to all applicances inside. I changed the old mercury thermostat to a programmable Honeywell one, because the old one can't stop furnace unless lasting a long time, say half an hour. One night the furnace continued burning until room temperature reached...

Electric Furnace ignoring the old and new thermostat [ 11 Answers ]

I have an electric furnace which I turn off in the summer. It turned itself on during a heat wave in spite of this. I have replaced the programmable thermostat with a new one and the furnace ignors the program. I have to turn off the circuit breaker to control having it on or off and it also...

View more questions Search