 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...
How do you hook up a thermostat for a York furnace to the furnace?
Greetings; I have a York Stellar furnace that I am guessing to be about 20 years old. Lately it has been doing the following. 1. Thermostat requests heat. 2. Blower starts up. 2. Pilot light comes on,(Glows Yellow). 3. After twenty seconds there is a click and then one of the following...
Hello. I have a York Diamond 80 furnace with a new Emerson S1-33109167000 control board. The problem began when the fan wouldn't turn off even though the A/C compressor had turned off. The original control board had gone bad and was replaced. But, the fan still keeps on running. The led has a...
I have maple/chase programmable "T" stat... Two stat wires going to control board (Note:.. this board operates heat/ac) wire #1 yellow, red, white, green.. wire #2 red, white. Board terminals Y1, Y/Y2, W, R, G, C... What is the correct wiring for wires #1&2 to terminals.. Thanks in advance for...
View more questions Search
|
