Ask Experts Questions for FREE Help !
Ask
    bdnu's Avatar
    bdnu Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 27, 2008, 08:41 AM
    "T" sat wiring for york gas furnace control board.
    I have maple/chase programmable "T" stat... Two stat wires going to control board (Note:.. this board operates heat/ac) wire #1 yellow, red, white, green.. wire #2 red, white.
    Board terminals Y1, Y/Y2, W, R, G, C...
    What is the correct wiring for wires #1&2 to terminals..
    Thanks in advance for your help..!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 27, 2008, 09:38 AM
    Please read

    https://www.askmehelpdesk.com/heatin...00-284131.html
    bdnu's Avatar
    bdnu Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 27, 2008, 10:59 AM
    Quote Originally Posted by hvac1000 View Post
    Please read

    https://www.askmehelpdesk.com/heatin...00-284131.html
    Thanks for your Time and Response... my "T" stat (Robetshaw 9610), my unit (York natural gas furnace/AC Mod. # P2MPD12ND6401A), my control board (Emerson 035-21366-001-B-0208). My original qestion... how to wire "T" stat wires to board terminals?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Nov 27, 2008, 11:20 AM
    I thought it was a maple chase?

    York has nothing close to that Model number.
    Emerson White Rodgers has no number close to that number you posted

    The Robert Shaw thermostat will only work on one heat and one cool systems. It cannot be used in systems labeled Y2 ETC because that signals the second stage cool circuit and the 9610 is only one stage not two.

    If this is a furnace only then RH/RC=RED and w=WHITE will be the two connections

    Here is the wiring diagram.

    http://www.icca.invensys.com/manuals...w/110-653B.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm Electric Furnace Blower works in "on" not in "auto" [ 6 Answers ]

I have an Intertherm Electric Furnace E2EB-015AH. I came home from work last night, turned the heat on and it didn't work as advertised. I could hear the relays clicking occasionally so I investigated a little and found the elements are heating up and cycling, the relay inside the thermostat cycles...

Where and when is the play "Surrender" playing in New York City? [ 2 Answers ]

Where is the play "Surrender" playing in New York City?

Furnace Wiring - Adding a common "C" wire [ 19 Answers ]

My new thermostat has uses a W,R,Y,G and now a "C". My wiring has only W,R,Y, and G and these are needed. How do I, or can I add the needed "C" wire? Is it just adding a wire from the transformer? :confused:

Changing wiring to use "second line" rather than "first" line on specific jack [ 9 Answers ]

Hi, and thanks! I have two phone lines (telephone numbers) coming into the house. I want to change a particular jack from one line to the other (exclusively for a fax). The current jack has a pair of tan wires going to "black (heavier wire and screw)", a pair of blue wires going to "red", a pair...

View more questions Search