 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
We have a relatively new (3 years or so) Kenmore Elite washer. It has been having the same problem on and off for a few weeks now. The washer will agitate during the wash and rinse cycles, but stops when it gets to the spin cycle. It just sits there full of water from the rinse, and emits a foul...
I own a Kenmore top loading washing machine model number:110.22622100. I just recently replaced the lid switch because it was broken, and it had worked for a couple of loads of laundry. Tonight it decided to not even reach the rinse cycle. There was a loud clicking noise coming from the dial, there...
I have a gas fireplace that I just replaced the thermal-coupler on. I'm still having the same problem that when it cycles on, it will be on a very low setting, go on for about 30seconds then go out again;pilot and all. Could the control knob be bad or possibley the thermostat? Or could it be the...
I have a 1 1/2 year old kenmore 110.28082700 washer. It is making a loud fast clicking sound when starting to spin or decelerate from spinning. Sounds like stripped plastic gears. Doesn't do it through the whole cycle - just intermittent. My wife won't stop talking about it until it is fixed...
My Kenmore 90 Series Heavy Duty Super Capacity Plus (mod # 11020902990) is roughly 7 years old. No problems until today when mid-cyle it started clicking loudly, and will not do anything else. The washer is full of clothing and water. I can't get it to drain, rinse, spin, etc. When it first...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
