 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore 110.2808 washer with a clicking sound before/after spin
I have a 1 1/2 year old kenmore 110.28082700 washer. It is making a loud fast clicking sound when starting to spin or decelerate from spinning. Sounds like stripped plastic gears. Doesn't do it through the whole cycle - just intermittent.
My wife won't stop talking about it until it is fixed so please help! |
||||
Check out some similar questions!
We have a relatively new (3 years or so) Kenmore Elite washer. It has been having the same problem on and off for a few weeks now. The washer will agitate during the wash and rinse cycles, but stops when it gets to the spin cycle. It just sits there full of water from the rinse, and emits a foul...
RE: kenmore 70 series model 110.20712990 Type 111 top load washer. Won't spin. Humming noise and a little burning/hot smell when supposed to be spinning. Bypassing the lid switch did not correct the problem. Changed out the motor coupling with no luck... still a humming noise but no smell.
My Kenmore 90 Series Heavy Duty Super Capacity Plus (mod # 11020902990) is roughly 7 years old. No problems until today when mid-cyle it started clicking loudly, and will not do anything else. The washer is full of clothing and water. I can't get it to drain, rinse, spin, etc. When it first...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
