 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My jetted bathtub leaks at the jets. Can it be repaired from the outside?
The tub has one access point that is maybe 1.5 ft x 2 ft. This makes inside access to the jets difficult. Can the leaks be stopped by sealing the jets from the outside of the tub? Each jet has a plate that screws off. (See attached photo.)
|
||||
Check out some similar questions!
In my hallway bathroom if someone takes a shower the water leaks under the carpet of the hallway should I replace just the faucet or do I have a leak somewhere else.
I own a home that is about 30 yrs old and has a clay/tile type roof. With age and a couple of hurricanes there have been leaks that have been repaired, of these three via the insurance co. (less deductible) and two which i have paid for out of pocket given the small size of the problem. We now...
Hi. I have a horrible problem. I have a jetted bathtub. I haven't used the jets on a regular basis. Now there is a terrible sewer smell coming from my bathtub. We tried Draino, and I tried running the jets with dishwashing powder and then running it again with hot water. Nothing works. Does...
The bathtub requires 2 20amp circuits. One for the pump and the other for the heater. I am going to install a 2 gang box with 2 gfi receptacles. Can I run 12-3 wire and have the 2 GFI breakers share the same neutral wire? Thanks for your help
I have installed a whirlpool tub. All the 6 side jets worked fine and it is completely level. Now (since it is all in and attached) two of the side jets on the same side are not working. (The tub only has six jets total-three on each side.) One has poor water flow and the other sucks in air. I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
