Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
DWV Question
[ 5 Answers ]
I have a old sink drain (it was a double sink but converted to a single bowl in the early 70's). There is a threaded stub sticking out of the wall that connects back to (what appears to be a cast elbow). I've tried penetrating oil to get the stub loose (I want to cap it off back flush with the...
Main dwv trap
[ 2 Answers ]
Our old septic sys. Failed this summer & the new tank is 60 feet from the house. Old tank was 200 feet away. We now have odors apparently coming through the main dwv out the roof vents and accumulating at ground level. Would a trap in the main dwv prior to exiting the foundation work? I'm...
P-trap GAP - p-trap too low to meet sink drain extension
[ 13 Answers ]
I just took an old crane drexel sink off the wall and replaced it for the time being ( I want to fix the older sink) with a cheap vanity/sink set. All that was easy enough, but now to my chagrin I can't finish the job. The p trap is too low, the extension pipe from the sink doesn't go all...
Why use copper for DWV?
[ 6 Answers ]
Hello, Something's been nagging me for a while. Several different kinds of material are used for DWV systems, each with its own pros and cons. PVC (and I guess ABS) is inexpensive and easy to work with, but is not allowed by all codes, and is a lot noisier (I've been to a few houses where...
DWV layout help!
[ 7 Answers ]
I am doing the rough-in on a bathroom remodel (trying to save some money). It is actually 2 small bathrooms back to back that share a 2x6 common wall - sink, toilet, shower with the mirror image on the other side. Each fixture will share common venting/drainage with its mirror fixture (sink-sink,... View more questions Search
|