How to get squirrels off my enclosed patio roof

Robbia Posts: 1, Reputation: 1

New Member

Oct 29, 2010, 10:06 AM

How to get squirrels off my enclosed patio roof

RickJ Posts: 7,762, Reputation: 864

Uber Member

Oct 29, 2010, 10:26 AM

Trimming overhanging branches is the best way to stop them from getting onto the roof. Can you, by chance, share a picture of the area?

Check out some similar questions!

What can I use to make a roof to keep the snow out of my semi enclosed balcony, etc. [ 4 Answers ]

I live in Quebec Canada. I would appreciate any advice, suggestions etc. with regards to what to do. I live in an upper duplex and my balcony is approx. 4 feet by 12 feet. There are recycled large windows around the entire balcony installed on the inside of the metal railing that surrounds the...

Squirrels in between my roof and the ceiling walls of my Attic [ 7 Answers ]

Hi, I am a first time home owner and I've been hearing what sounds like squirrels running across the bedrooms & bathroom ceiling. When I go in the attic there's nothing there and no way for a squirrel to get in but I hear them in the ceiling of the attic so I pound on the walls and you can hear...

Is an enclosed LB OK [ 1 Answers ]

Does it pass code to have an LB in a wall cavity say between a meter base and a main service panel thus eliminating the need to see it mounted on the exterior of the building?

Patio roof [ 0 Answers ]

I am building a 20'x24' patio roof of treated wood and galvalum 2on12 pitch. Using 6"x6" posts every 12' on the long side Would girders made of 2x12 sandwiched with 1/2 plywood work to span the 20' across with a total of 3 girders then lay crossway 2x8x12 on 24" centers to attach the metal...

Planning new concrete patio in area enclosed on 3 sides [ 3 Answers ]

I am in the planning phase of pouring a concrete patio that I plan on staining and scoring. I am having trouble with the layout because the area is surrounded on two sides by the house' foundation and on one side by a side walk. The area is approx. 100 sf. I understand the need for expanion...