Ask Experts Questions for FREE Help !
Ask
    boxerintn's Avatar
    boxerintn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 13, 2009, 06:03 PM
    Is an enclosed LB OK
    Does it pass code to have an LB in a wall cavity say between a meter base and a main service panel thus eliminating the need to see it mounted on the exterior of the building?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Nov 13, 2009, 06:09 PM
    No, all condulet (LB) covers must be accessible.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Enclosed porch?sun room [ 0 Answers ]

how much should I charge to build a 8'x16' sun room with a stone wraped bottom approx. 120 sq. ft. with roof

How do you change lightbulbs on an enclosed ceiling fixture? [ 2 Answers ]

This one's Hampton Bay and the electrical people took the instructions with them when they left months ago. I don't know how to get the outer ring, which is plastic, off the glass part so I can change the lightbulbs. Do I pry it off with a screwdriver or does it screw off? I've tried to do the...

Getting memory error messages [ 12 Answers ]

I've been having error messages like this: The instruction at "0x01762bf2" referenced memory at "0x01806680". The memory could not be "read" Click on OK to terminate the program. I've written about this error message before in a previous question but I'vre never sent a log file because I didn't...

Enclosed Bearings [ 3 Answers ]

Hi all, Can anyone point me in the direction of a manufacturer for enclosed bearings? Done a couple of web searches but nothing leaps out. Thanks

View more questions Search