 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier WM 8000 won't light
- Blower runs for 90 seconds
- Ignitor glows - No flame - Code 34 - 3 attempts - Shut down - Code 14 There is no flame but I attempted cleaning the flame sensor anyway. Gas supply is fine, and control switch is on. Anything else I can do to narrow this down? T.I.A. |
||||
Check out some similar questions!
I have a Carrier Weathermaker 8000 furnace. When the heat is turned on, the electronic ignitor glows and fan is running. The burner does not ignite. I have turned the power and gas off to the unit and reset the unit. After turning the power and gas back on, I set the thermostat to a desired temp...
My furnace has an electric lite and the ignitor gets red but my furnace won't lite
Says aux heat is on but blower doesn't come on.Why?
I've had my carrier a/c heat unit for about 10 years.. . Good service, but it has recently been making a sqeaking/chirping/screeching sound when the fan is running in a/c mode. I reminds me of the sound a car makes when the fan belt is slipping. Any suggestions? Thanks, lankford3
Its comes on for about 15 seconds and then cuts off
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
