 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier weathermaker 8000
I have a Carrier Weathermaker 8000 furnace. When the heat is turned on, the electronic ignitor glows and fan is running. The burner does not ignite. I have turned the power and gas off to the unit and reset the unit. After turning the power and gas back on, I set the thermostat to a desired temp and still no fire. The ignitor glows, but no fire in the burner. Help??
|
||||
Check out some similar questions!
Hi, I am having a problem with my Carrier Weathermaker 8000, Last night when we went to bed, everything was fine, this morning when we woke up it was a chilly 61 degrees in our home. Our neighbor came over to try and fix the problem, but, now we can't get the heater to come on at all, before while...
Says aux heat is on but blower doesn't come on.Why?
I've had my carrier a/c heat unit for about 10 years.. . Good service, but it has recently been making a sqeaking/chirping/screeching sound when the fan is running in a/c mode. I reminds me of the sound a car makes when the fan belt is slipping. Any suggestions? Thanks, lankford3
I have a carrier weathermaker 8000 furnace and it come on for about 20 seconds then the burners cut off, the fan keeps going and it just keeps repeating this cycle like it is short cycling... Does anyone have any ideas because it is freezing in my house...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
