 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I am updating from an old mercury white rodgers thermostat to a new Honeywell th8000.
Followed the directions to the best of my ability, but I can't get the AC to kick on? Fan come on, but AC outside doesn't. Any help would be great. Old thermostat had a yellow Y wire soldered to the back of the unit and then connected to the terminal. Also had a jumper running from rc to rh. Thanks
|
||||
Check out some similar questions!
I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...
I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...
Trying to get the new Honeywell Digital thermostat RTH 110B to work both in heating and cooling modes. 5 wire installation from old White rdogers thermostat. Wire colors are G Y W R Br. Have to switch the R wire with the Br wire to get fan oeprating or A/C. Then have to switch them back...
I have on old White-Rodgers 4 wire single transformer system I believe. Model 1F76W357. I am installing a Honeywell RTH3100C non programmable thermostat. Wires on the White-Rodgers are: RC RH (Jumpered inside the thermostat) W Y G
I am looking at buying a new thermostat and I am trying to decide which to buy the Honeywell 8000 or the White-Rodgers 90 series (1F95-1277). I am also trying to determine what the difference is between the two White-Rodger 90 series models (1F95-1277 and the 1F97-1277). I know what the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
