Ask Experts Questions for FREE Help !
Ask
    scross44's Avatar
    scross44 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 22, 2010, 06:52 AM
    Heat will not work
    " no heat. have a york D2NA018 thru 048. I turn heat on and turn up thermostat and no air comes out of the vents. If I turn the fan from auto to on I get a weak flow of cool air from the vents. I went outside to look at the unit, and I can hear a fan or blower running in the unit.(fan on thermastat is back on auto) I open the side of the unit and can see the pilot is not lit, and the small blower unit in the top left is not on. Unit is propane. Any help? is back to auto)"

Check out some similar questions!

Heat Pump blows 5amp fuse when switching between defrost & back to heat. Them Heat work [ 3 Answers ]

I have a Carrier Heat Pump System. It’s about 5 years old and has functioned OK until this Christmas Eve. One problem is the condensing unit is not kicking back on after it goes into defrost mode. I found a 5AMP fuse blown in the attic unit and once replaced it functioned. At least for a day or two...

I can't get heat to work on my heat pump [ 13 Answers ]

I have installed a Goodman self contained single staged heat pump but cannot get the heat to come on. I installed a Honeywell circle manual thermostat. If I put it on Cool with the fan on auto, the a/c and fan work great BUT when I put it on Heat with the fan on auto, I get no heat, just fan....

A/C and heat sometimes work, sometimes not [ 5 Answers ]

Have a combo AC/heat unit (electric). The thermostat is a Honeywell 8195. The AC randomly either works or it doesn't. Seems to depend on the day. Once it works during a particular day it will usually reliably cycle on and off as needed for the entire day. If it doesn't work immediately at...

A/C working, switched to heat, now ac and heat don't work [ 1 Answers ]

Hello, Replaced my thermostat in the summer, everything worked good,switched the new thermostat to heat for the first time, now neither the A/C or heat work? Any Ideas? Andy

AC or Heat does not work when switching to AC or Heat [ 3 Answers ]

I have a programmable thermostate installed a year ago and it has been working since until a few days ago. Both AC and Heat don't work , I don't hear any kicking. I did a reset on the thermostate did not make any difference. The fan is on Auto. Now I am interested in knowing if it is the...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.