 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman GMS 80 Furnace
I have a Goodman GMS 80 furnace on propane. The pressure port on the draft inducer constantly plugs with residue. I have to remove the draft inducer and remove the residue with a dental pick at least once a month during the heating season. Just using a tip cleaner to open the hole allows the furnace to run a day or two. Goodman has been no help nor has the supplier. Anyone have a fix for this? Thank you!
|
||||
Check out some similar questions!
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Goodman furnace circuit board has heat and cool. No wires to heat but wires to cool. Is there sopposed be a wire from fan to heat? Just installed new fan and a/c works, just tried to turn on the heat and it went on for a while than shut off. What's up with that? Please help...
I am replacing my 28 year old furnace with a Goodman furnace and an AC unit. Never had central air before. I have read conflicting reports on the quality of the Goodman line and wondering if I am making the right purchase. I am getting a 95% efficient, 90,000 BTU, 2 stage heating with a variable...
HI My Goodman furnace will not (repeat cycle) . Furnace will operate, but after it reaches The desired HEATING TEMP, it shuts down and will not recyle, when the temp drops. I then get the 3 blink flashing light---indicating (pressure switch is stuck open). Then I turn the furnace off for...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
