Ask Experts Questions for FREE Help !
Ask
    jkpoplar's Avatar
    jkpoplar Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2010, 02:12 AM
    Gerber pilot valve runs slow, no water out out the side nozzle.
    It appears to be plujgged. I have removed the top cover but that is as a far as I get. Does anyone have a diagram of the valve which will help me take it apart.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Oct 18, 2010, 07:37 AM
    Is this your fill valve? (see image) If so you have to replace the washer (see image) So you have a FluidMaster type ball cock. This is a common problem with these ballcocks. They have a small washer with a hole,(see image) in the center that swells shut in time preventing water from entering the tank.
    Purchase a FluidMaster Seal#242 from your local big box store. To replace it you will have to shut the water off to the tank and take the tank lid off. Twist the top of the ballcock off counterclockwise, (see image) and pull up. Pry out the seal and replace it. Reassemble, turn the water back on and give it a flush. Better now? Regards, Tom
    Attached Images
       
    jkpoplar's Avatar
    jkpoplar Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 18, 2010, 08:29 AM
    Yes. It is my valve.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gerber 99-646 Pilot Valve noisy when flushed--slow water recovery also [ 1 Answers ]

I have a toilet containing a Gerber 99-646 Pilot Valve. When the toilet is flushed, there is a noise like a fog horn in the pipes and it takes unusually long for the water to refill into the tank. One the water refills, the noise stops. Though all 4 toilets in our condo have the same Pilot Valve,...

How to adjust gerber pilot valve 99-646 [ 0 Answers ]

I recently moved into a house that has a toilet with a gerber pilot valve 99-646. It often stops up because there isn't enough water flow so I would like to adust it to allow more water. It is only about half way up as it is now. I'm not sure how to adjust it though so I wanted to post here so I...

Gerber Pilot Valve 99646 keeps running [ 0 Answers ]

I have a Gerber 99-646 Pilot Valve and water keeps running. I tried cleaning it, etc, but nothing helps. Trying to lift the float road does not make any difference. Any help would be very much appreciated.

Gerber pilot valve 99646 [ 1 Answers ]

My toilet doesn't stop running. I have the gerber pilot valve and every time I flush the freakin thing take's forever to stop running now it just keeps running. What do I do replace it or have it fix?

Gerber pilot valve 99-646 2 minutes to fill and clogs [ 3 Answers ]

Have just moved to new apt with gerber bowl. Takes 2 minutes to fill and clogs easily. Want easiest fix. Not cheapest. Willing to replace entire inside if will correct problem and easier then trying to disect inside. Thank you, Jerry

View more questions Search