Ask Experts Questions for FREE Help !
Ask
    jerrycastle's Avatar
    jerrycastle Posts: 3, Reputation: 1
    New Member
     
    #1

    Sep 29, 2008, 04:49 PM
    Gerber pilot valve 99-646 2 minutes to fill and clogs
    Have just moved to new apt with gerber bowl. Takes 2 minutes to fill and clogs easily.
    Want easiest fix. Not cheapest. Willing to replace entire inside if will correct problem and easier then trying to disect inside. Thank you, Jerry
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Sep 30, 2008, 11:09 AM
    Quote Originally Posted by jerrycastle View Post
    Have just moved to new apt with gerber bowl. Takes 2 minutes to fill and clogs easily.
    Want easiest fix. Not cheapest. Willing to replace entire inside if will correct problem and easier then trying to disect inside. Thank you, Jerry
    You may not have to replace the ballcock. Tell me what you have. Float ball on a rod or can on a wire,(see images)? Regards, Tom
    jerrycastle's Avatar
    jerrycastle Posts: 3, Reputation: 1
    New Member
     
    #3

    Sep 30, 2008, 03:51 PM
    Regular ballcock -pic 2. Thank you. Jerry
    jerrycastle's Avatar
    jerrycastle Posts: 3, Reputation: 1
    New Member
     
    #4

    Sep 30, 2008, 04:29 PM
    IM SORRY the previous response was incorrect it is the 1st diagram the fluid master.

    Thank you again

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pilot light goes out on gas fireplace about every 10 minutes [ 2 Answers ]

Our pilot light keeps going out on our gas fireplace. It lights fine and we have a full tank of gas. It was working fine and then it started to do this. It could be dirty. How would I clean it. We have had very low tempetures in the past few days. It has never done this in the past. O'Neilmom

Fireplace pilot goes out after 15 minutes [ 1 Answers ]

I have a 12 year old firplace that starts fine with the pilot but goes out after 15 or so minutes... as soon as it gets hot. I went on line and most of the advice was the same... to change the thermopile. I changed this and have the same problem. Now sometimes the burner won't turn on the same as...

Toilet fill sound every 5 minutes! [ 8 Answers ]

This is happening with both toilets in my house. It also happens when I bump or jar the toilet or turn on another faucet in the house. Every 5 minutes or so, the fill tube lets water into the tank for about 3 seconds, then stops. I have drawn a line in the tank, and the water level doesn't seem to...

Well pump takes 5 minutes to fill bladder holding tank [ 12 Answers ]

Last year we installed a new bladder holding tank. Pressure set at about 27 lb since pump turns on at 30LB. After installation pump was running a long time to fill pressure tank. If drawing water from multiple sources at one time once pressure dropped and pump went on it could not supply enough...

Toilet fill valve [ 3 Answers ]

I replaced the fill valve in my toilet and the water will not fill up in the tank. When I disconnect the pipe between the shut off and tank, I can turn the water "on" and nothing happens. The sink and shower both work but the water won't go to the toilet. What can I do to fix this problem?


View more questions Search