Ask Experts Questions for FREE Help !
Ask
    pjkelly's Avatar
    pjkelly Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 6, 2010, 07:03 AM
    G10Q3-110V-2 lennox furnace wiring diagram
    I am in need of the wiring diagram for a Lennox G10Q3-110V-2 furnace. This furnace is over 30 years old. Thank you
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 6, 2010, 08:02 AM
    Sorry oldest I have is for an 11 but it might be close.

    http://0190acd.netsolhost.com/manuals/G11E_Series.pdf
    pappa123's Avatar
    pappa123 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 3, 2012, 08:28 AM
    I had changes out the transformer and it keeps blowing.just wanted to in sure I put the wires in correct spot. Not getting a/c unit to kick on. Had a guy say it could be the theromstate. Any thoughts on it,
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can someone assist me in locating a wiring diagram for a lennox furnace circa1980 [ 5 Answers ]

The unit is not properly wired between the fan control center and the limit switch the t/stat is not in the loop because the only way to cut the unit on is to activate the wall switch for the fan blower

110v spa wiring diagram [ 2 Answers ]

I need to go from 220v to 110v on spa heater. 3 line set up, and I have instructions on 110V with White jumper on Neut and l2, black on L1... 220v also had Red on L2... what do I do with that unused wire?

Lennox furnace wiring diagram [ 2 Answers ]

I am looking for the wiring diagram for a model G8-137-5 Lennox furnace that is about 33 years old

I'm looking for a wiring diagram for a Lennox furnace Model No. G12D2-82-2 [ 1 Answers ]

I'm adding a new thermostat to control the furnace but need a better idea of the circuitry.

Wiring diagram for a Lennox Model E8-25-1 Electric Furnace. [ 1 Answers ]

The wiring Diagarm on the front panel is not clear enough to read. Also I need to know the proper sequencers & limits to use in this furnace. The furnace has been worked on by several people and I would like to rewire With all new parts

View more questions Search