Ask Experts Questions for FREE Help !
Ask
    kahhornick's Avatar
    kahhornick Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 18, 2010, 09:40 AM
    110v spa wiring diagram
    I need to go from 220v to 110v on spa heater. 3 line set up, and I have instructions on 110V with White jumper on Neut and l2, black on L1... 220v also had Red on L2... what do I do with that unused wire?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Jul 18, 2010, 10:08 AM

    Without seeing the instructions it is impossible to tell.

    Can you scan the instructions and post them, or maybe find them online and provide a link?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #3

    Jul 18, 2010, 02:57 PM

    Echoing Stan, without more details we are dead in the water.

    However, you should not take a 120Vac tap off a line (be l1 or l2) unless you have documented proof from the manufacturer of the spa authorizing such a change.

    That is considered to be product tampering.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need Circuit diagram to make 220v power point by using two 110v lines [ 9 Answers ]

I need Circuit diagram to make 220v power point by using two 110v lines. Can any one do this for me. Thanks

EM501-T spa pack wiring diagram [ 0 Answers ]

Trying to find the interior wiring diagram for an old EMT501-T spa pack. The tub came with the house but was not working when I moved in. There was a spare spa pack and had to make one from two but not sure if the wiring (contactors, relays, ect) is correct.

220 v wiring is only giving 110v [ 5 Answers ]

My dad is using 220 v wiring but it's only outputting 110. He wants to isolate the problem instead of replacing the entire length of wire. Any idea what he can use to detect where the fault is occurring? I've looked but can't find anything.


View more questions Search