 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do I remove the draft blower on a rheem rgra-10ezajs?
The draft blower suddenly started making a grinding noise. I don't know if the fan picked up some debris or if a fin blade might have broken. I have removed the 4 mounting screws that attach the blower to the furnace, but the blower barely budges. Seems to still be stuck to the furnace wall.
|
||||
Check out some similar questions!
I have A Rheem Criterion II Model RGLH-10EBRJR and I've been told I need to replace the draft inducer because of hairline cracks in the plastic housing. I looked at Rheem web site and no help there. How/where can I find a replacement part? Estimate from repairman was in excess of $400 for part...
14 years old, Rheem Classic 90 Plus, Model #, RGRA-7EMAES, ignitor won't start. Heating contractor replaced the inducer motor, preassure switch, made sure intake & exhaust are clear. Determined that the heat exchanger is clogged? Condensation will not drane when furnace is running. Once the...
Hello: I have a Goodman GMP100-5 furnace. I have a random problem that seems to happen more often when it is cold outside. The draft inducer blower will start up for only 1-2 seconds then will switch off causing the system to not turn on. If I manually reset the system off and on, the motor...
Greetings, I have a Trane gas-fired furnace installed around the mid 90's. Model# TUE040A924H with a new filter. I'm writing because I am cold. During the day the furnace usually works fine but at night when it gets really cold the furnace will not keep up with the temperature I set at the...
We have a Nordyne G6RC Series 90+ Upflow Condensing Gas Furnace. I think its about 8 years old, but I'm not exactly sure. It seems to be having a problem with the induced draft blower. What's happening is when the thermostat calls for heat, the induced draft blower won't come on, and then I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
