Check out some similar questions!
Transitioning from ungrounded to grounded wire in a 100 year old home with lathe & pl
[ 1 Answers ]
I have taken out a wall in an old home with lathe and plaster wall. The existing wire is the old ungrounded wire. I want to transition this wire to a new outlet. It appears that the old wire has been stapled to the studs during installation. Any ideas on how to transition the old wire using 12-2...
The gas line broke on a Ryobi 725r and I need to know the diameter of the line.
[ 1 Answers ]
The gas line broke on a Ryobi 725r and I need to know the diameter of the line.
Connection to gas range gas line too large for gas line intake valve
[ 2 Answers ]
Connection to gas range gas line too large for gas line intake valve. How can I step the range back line down a step. Is there some kind of converter I can buy?
How do I pressure test a new gas line in home?
[ 3 Answers ]
I am installing a new gas line (Black iron) for propane boiler and I would like to pressure test. What's the best way to do this... what psi and for how long?
Can an open ground reading on a grounded circuit mean a 240V line?
[ 2 Answers ]
Hi, folks - wondering if someone can help me out. I'm getting an "open ground" reading on a wall outlet which is being fed by 12/2-grounded romex cable. The cable is grounded at the panel, so I'm not sure why I should be getting an open ground reading. This line is for an electric baseboard... View more questions Search
Add your answer here.
|