Ask Experts Questions for FREE Help !
Ask
    RhodeIsland's Avatar
    RhodeIsland Posts: 4, Reputation: 1
    New Member
     
    #1

    Jan 25, 2009, 10:18 AM
    Gas boiler pilot won't stay lit
    This morning, I found the boiler pilot light was out. I followed directions found on a DIY website. I lit the pilot, while pressing the red reset button for 30-60 seconds. As soon as I let go of the button, the pilot immediately goes out. The flame is blue. Is this the thermocouple? If so, what is the average life of a thermocouple? This would be the third time I've had to have the thermocouple replaced... they seem to cease working properly after about 2 year or so. Is there anything else I can do myself before I have to call in the professionals? Thanks.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 25, 2009, 10:24 AM
    Is this the thermocouple

    At this point I would agree the thermocouple could be defective.

    If so, what is the average life of a thermocouple?

    5 minutes to 15 years or more. Manufactures do not post how long a thermocouple will last. In my second home the thermocouple has never been replaced and it is 15 years old.

    Is there anything else I can do myself before I have to call in the professionals?

    Not unless you can replace the thermocouple yourself.
    RhodeIsland's Avatar
    RhodeIsland Posts: 4, Reputation: 1
    New Member
     
    #3

    Jan 25, 2009, 10:33 AM
    Thank you for answering my questions. I am not a handy-woman by any stretch of the imagination. How difficult is it to replace the thermocouple yourself? Also, being a Sunday, I would like to hold off on calling someone until Monday, during regular hours, to save some money. The house temp. upstairs is 55 and on the main floor is 53. I was thinking of buying a small room heater just to make it through until tomorrow.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Jan 25, 2009, 11:04 AM
    Replacing a thermocouple is not all that difficult but you have to have the tools and the knowledge in how to use them. Depending upon the conditions of the weather where you live a small heater might get you by.
    DaleCGreen's Avatar
    DaleCGreen Posts: 2, Reputation: 1
    New Member
     
    #5

    Sep 14, 2013, 01:22 PM
    Furnace stopped working, pilot out, would not stay lit.

    Replaced thermocouple, still wouldn't remain lit. Bought new gas valve and replaced (Honeywell VR8300A4508), installed 2nd new thermocouple, still won't remain lit when I release button.

    With button depressed, 2 inch pilot flame hitting top 1/2in of thermocouple making tip glow red hot. Voltage of TC is >30mv not connected to gas valve, and 14mv when connected to gas valve (as it should). In fact, all three TCs read about 30mv open circuit, and 14mv when inserted in gas valve (original, 1st new one, 2nd new one).

    Seems to point to bad gas valve, even though the one now in furnace is brand new from PexSupply.

    Agree?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pilot light on glow worm boiler [ 2 Answers ]

Pilot light on my glow worm domestic gas boiler goes off as soon as boiler cuts of on thermostat.I have replaced the thermocouple but it is still shuting the gas valve . What can be wrong ,the gas vavle or thermocouple.please help.

Boiler Burners will not stay lit [ 1 Answers ]

I have a honeywell smartvalve sv950. I have replaced the igniter and the burners light and then go out. Also the fan is always on. What can cause this?

Pilot will stay lit [ 2 Answers ]

My pilot will not stay lit when the heater comes on.

Pilot will not stay lit [ 1 Answers ]

My mother has an old floor heater that is about 45 to 50 years old and needs a key to turn the heat up and down, also to turn on the gas for the pilot light or off in the summer. When I try to light the pilot it will flicker but not stay lit. I have tried to clean the pilot tube with no such luck....


View more questions Search