 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
My furnace will not turn on at all. I try resetting the thermostat but it still will not work. I checked some of the troubleshooting website and they said that the flame sensor.
My Rheem Furnace will ignite the flame properly the blower will start but shortly after the flame will go out before heating properly. Could the flame sensor need replacing or should or replace the thermostat control?
I have a Bryant 80 plus furnace. I've been having a problem for about a month, now. I have noticed that sometimes not all three burners have a flame after the gas valve releases the gas from the manifold, which causes the system to lock after three or four attempts. The very first burner, from...
Goodman furnace is showing single blink every 2 seconds. I see that a possible problem is the FLAME SENSOR. My main question: Is the flame sensor the SAME part as the ceramic ignitor ? If different, where is it in relation to the ignitor ?
Seasons greetings, My church recently received a used furnace when the t stat calls for heat the ignitor starts to glow after about 30-40 sec. the furnace lights and then after a few seconds the burners go out we recently changed the ignition module which is a white rodgers 50e47-843 after this...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
