Ask Experts Questions for FREE Help !
Ask
    Mishi22's Avatar
    Mishi22 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 3, 2010, 01:09 PM
    Connecting my Hunter 40120 thermostat
    I have 4 wires, red ,green , blue, white, I hooked the green to the G portal,white to the W, and red to the RH portal, my thermostat is still not working.
    Baltar's Avatar
    Baltar Posts: 7, Reputation: 2
    New Member
    		  
    #2

    Oct 3, 2010, 01:58 PM
    Did you install the batteries properly? Did you check the corresponding wires and connections at the circuit board on the furnace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connecting a 2 wire oil heater to Hunter 44260 thermostat [ 1 Answers ]

I have an old 2 wire oil heater. I purchased a Hunter 44260 programmable thermostat and need to connect. I have a red and white wire coming out of the wall and a jumper from RC to RH terminal on the thermostat. We have the 2 wires from the wall contected red wire connected to the g Terminal and the...

Replaceing honeywell 3210d thermostat with hunter 44668 thermostat [ 0 Answers ]

Can anyone tell what wires go where? I've got red, blue, green, white, black, orange, brown and yellow. And the hunter thermostat has g, w/b, y/o, rc, rc1, rh, and y1.

Connecting Hunter Model 44110 Digital Thermostat [ 4 Answers ]

I have a 15 year old house, with an original heating/AC system. I hoped to connect a new Hunter 5+2 model 44110 digital thermostat, but have run across one problem. The old Trane Thermostat has this information on it - Model AY28X105 30Volts A.C. 1.5 AMP with 5 wires, labelled G, Y, W, R, 2...

Trouble Connecting Hunter Thermostat. [ 4 Answers ]

I just bought a Hunter digital thermostat.. Model 44155C. I am trying to switch my old York thermostat to this one. The york thermostat has 7 wires, none of them are labeled, and they just screw into different screws on the box. There is a white, dark blue, green, red, black, orange, and yellow....

Connecting an old Honeywell to a Hunter 44660 [ 1 Answers ]

I want to replace my old Honeywell thermostat with a Hunter 44660 programmable thermostat but I am having problems connecting the wires. The codes on the old theromast do not match up with the codes on the new one. Old thermostate codes G=Green C=Black R=Pink Y=Yellow E=White WZ=Blue...

View more questions Search