Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I only have 3/4" between plank subfloor and hardwood floor. How can I install tile?
[ 1 Answers ]
I live on the third floor of a 1903 brownstone in Boston. The area at our front door was tiled with ceramic. The tiles cracked and I decided to replace them. When I removed the tile and cement board, I discovered that the cement board was attached directly to the old 1x8 plank subfloor. I would...
How do I install a tub drain in existing concrete floor?
[ 2 Answers ]
We are finishing our basement. Our home is 110 years old. The basement used to be dirt floor but in the 40's it got concreted. At some point a water closet existed because there is a toilet drain and sink drain and vent. We want to add a clawfoot tub a urinal, sink and toilet.There is no drain for...
How to install a bathroom in 2nd floor
[ 2 Answers ]
Do I need to change any piping when replacing a laundry room with a bathroom
Can I tile my bathroom floor over existing linoleum?
[ 4 Answers ]
I have 10 year old linoleum in a small bathroom and would like to tile over it with a 6x6 slate type tile. What materials can I use and how do I go about doing it?
Install bathroom plumbing undisturbed subfloor
[ 1 Answers ]
I'm converting an upstairs bedroom into a bathroom. There is an existing hardwood floor which I'd like to keep for the bathroom. Can I install the drains for the toilet and tub from under the bathroom floor without tearing up any of the hardwood floor and just cutting the floor at the drain... View more questions Search
|