Ask Experts Questions for FREE Help !
Ask
    lisafenner's Avatar
    lisafenner Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 30, 2006, 06:20 PM
    Dyson dc04
    My dc04 Dyson hoover will not pick up through the floor plate, it only works by using the hose. The belt is still in tact so it has nothing to do with that. At the same time the click mechanism which ensures the hoover stays upright when using the hose or when you have finished using the hoover, has failed (it does not click in to place at all). I have to lean the hoover against the wall or furniture to avoid it from toppling over. Is it repairable?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Dec 31, 2006, 09:02 AM
    It probably isn't picking up because it is clogged up. Remove the plate and clean it out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dyson DC04 belt keeps coming out! [ 3 Answers ]

Hi, My DC04's belt keeps coming out. Also recently within a couple of months two belts have also snapped. Can anyone advise why this is? Thanks

Dyson hoover nightmare [ 2 Answers ]

Any ideas why my Dyson (upright) is not sucking up through the hose on the handle?:confused:

Old dyson dc01 [ 1 Answers ]

I notice there are a few "experts" on these vacuums. Mine sucks great, the belt id fine, the brush cylinder turns by hand, but the brush does not turn when running, like as though the spindle from the motor has become disconnects. The brush did clog up with hair some time ago - perhaps this has...

Dyson Dc07 [ 24 Answers ]

I have a Dyson DC07. It won't pick anything up although the motor is working okay. I have cleared all the obvious areas and have washed the filter. Although after clearing these areas, it will pick up with very weak suction for a few minutes using the attachment, it then stops and I end up...

Dyson 04, not picking up properly. [ 1 Answers ]

My Dyson 04 is not picking up properly, unless I push the front down with my foot. As soon as I alter the angle of the handle it stops picking up again until I press down on the front again. The suction is great, the cyclone is turning, I have removed the baseplate and reassembled it. Grateful for...

View more questions Search