 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to connect Programmable Thermostat without colored wires?
The Honeywell I am attempting to install only has 2 Black wires. My old one has 5 wires, two that connect at the top, two that connect at the bottom and a copper one that connects lower at the bottom. I'm not sure where the black wires on the new thermostat needs to be connect, or what I should do with the extra wires connected to the old thermostat. Can anyone help?
|
||||
Check out some similar questions!
For an hour and 15 minutes we have been trying to get the copper wire tips connected to the RTH230B Honeywell thermostat. The old non-programmable thermostat we removed had screws that tightened down and held the wires in place. The new model has screws in a plastic "box" that do nothing. When...
I have a new Honeywell thermostat to install when I take the wires off the old unit there are 5 wires. The coors are Red, White, Yellow, Blue and Green. I can hook up the first 3 to the new Thermostat but on theinstructions it has a Rh (R heating)spot and a Rc ( R cooling) I don't knowif the blue...
How do I connect the wires from a Janitrol to the Honeywell RTH7500 Thermostat. I have the following wires: R Red Y Yellow G Green O Orange W2 White E Beige/Pink C Blue Black wire not connected
I only have 2 wires to connect I removed the old wires from the W and R connection And put them on the new one but nothing happens. Any help would be appreciated
Okay.. so here is the deal , went out bought a digital themostat today , the guy at the store told me it would be easy... but I don't think I set it up right because I am FREEZING! I have 4 wires... 1-Red 1-Blue 1-Yellow 1-Green Now.. I attached all the wires correctly... however I am...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
