Ask Experts Questions for FREE Help !
Ask
    spoiledbrat92's Avatar
    spoiledbrat92 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 28, 2010, 10:32 AM
    a/c problems 2001 ford ranger xlt won't blow cold till on an extended period
    a/c 2001 ford ranger 3.0 won't blow cold air good air just doesn't cool down
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Sep 28, 2010, 11:17 AM

    The compressor is likely shot--they typically need to be replaced every 100,000 miles. This link may help:

    https://www.askmehelpdesk.com/cars-t...ml#post1864159

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I replace a heater plenum on a 2001 ford ranger [ 1 Answers ]

Where are the bolts located to remove this? I am starting to think I will have to take out the entire dash. Will I or is there a better way?

2001 ford ranger [ 1 Answers ]

I have 2001 ford ranger 3.0 does anyone what the beraing size is in the tensioner pully

No brake lights on 1980 ford ranger xlt f150 truck [ 3 Answers ]

Hi I bought this used work truck on which the wires have been cut rewired and recut a number of times on this truck for trailer lights, etc. I need a wiring diagram for this truck if any one has just that. I cannot at this time afford a book on the truck it is like $32. I do have the appropriate...

2001 Ford Ranger [ 4 Answers ]

I recently purchased a 2001 Ford Ranger XLT. The serpentine belt had a bit of an inconsistent 'squeak' sound. I looked at the belt, and found that it is dry-rotted a little and has cracks. I sprayed a product that is supposed to eliminate the squeaking noise (should that be the true problem),...

2001 ford ranger edge v6. Trans fluid [ 1 Answers ]

This truck has 60,500 miles on it and this has the original trans fluid in it. Seems to be working fine. I hear two stories about changing trans fluid. One says you should change the filter too, one says flush only is fine. Which is true?


View more questions Search