Ask Experts Questions for FREE Help !
Ask
    littlejoe1960's Avatar
    littlejoe1960 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 26, 2009, 02:13 PM
    How do I replace a heater plenum on a 2001 ford ranger
    Where are the bolts located to remove this? I am starting to think I will have to take out the entire dash. Will I or is there a better way?
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Dec 26, 2009, 10:00 PM

    Most of the entire dash does have to come out. Can take a couple days unless you've done this before...


    Some of the fasteners are hidden.
    Patience is required for this much disassembly and repair.
    And, the steps to disassemble need to be also reversed to properly reassemble your truck.
    Special tools or skills may also be needed.
    Do you have the time, tools and patience to finish?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2001 ford ranger [ 1 Answers ]

I have 2001 ford ranger 3.0 does anyone what the beraing size is in the tensioner pully

How do I change the idle pulley on a 2001 ford ranger [ 1 Answers ]

How do I change the idle pulley on a 2001 ford ranger

2001 Ford Ranger [ 4 Answers ]

I recently purchased a 2001 Ford Ranger XLT. The serpentine belt had a bit of an inconsistent 'squeak' sound. I looked at the belt, and found that it is dry-rotted a little and has cracks. I sprayed a product that is supposed to eliminate the squeaking noise (should that be the true problem),...

2001 ford ranger edge v6. Trans fluid [ 1 Answers ]

This truck has 60,500 miles on it and this has the original trans fluid in it. Seems to be working fine. I hear two stories about changing trans fluid. One says you should change the filter too, one says flush only is fine. Which is true?

View more questions Search