 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My a/c is not cooling, it reading 70 degree, but it's about 90 it comes on for a seco
Have a Robertshaw 9420 thermostat my second one! It is blank but flash sometimes showing the temp at 70 degree, can't adjust the setting it come on for a second or two then shut off for about 45 minutes. It is about 90 degree
|
||||
Check out some similar questions!
I would like to replace the current SECO 24 VAC TA2000 Heat Pump Thermostat. I want to put in a programmable thermostat as a replacement. Would like to know brand names that are a "good" replacement for the old model. Current thermostat has one line coming from the wall, then 6 wires coming from...
I have a kenmore 3 ton 14 series unit. At night it cools good but day time it goes to 80 degrees. The compressor had a leak so the service man filled it up. Wasn't the service man suppose to change the dryer on it? The hose outside is not even cold and in the house it blows a little cool air but...
Maytag refridge is not cooling (freezer is). Any suggestions or does anyone know if I need a repair person and what the problems and range of expected reasonable costs might be to have it fixed.
The old thermostat would drop 3 degrees before firing up the furnace to heat. This Noma model 52-2570-6 drops .5 degree and it comes on to heat. I want to have the 3 degrees, because the furnace is coming on every 10 minutes
Now that it is the summertime the air conditioning in my apartment runs so that the apt. gets TOO cold according to the setting on the thermostat. In order to get it shut off, I have to set the indicator on the thermostat so that it is 80 in order for the unit to shut off. Is there any way to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
