 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do I wire a new Honeywell RTH6350D thermostat?
I have an old White Rogers thermostat with 3 wires marked "Y", "R", and "4". Which slots shopuld these wires go into on the Honeywell RTH6350D? I am trusting the associate who assisted me at the store with getting the proper model. My heating system is a 4 zone, gas boiler with baseboard radiators.
|
||||
Check out some similar questions!
The TA 2000 has W2, O, X, R, Y, G, and E. The RTH6350D has O/B, R, Y, G, E, Aux, and Rc. Which wires go where? (I'm assuming that the wires that have similar terminals on both models are just moved across. But the W2, Aux and Rc don't have an equavalent.
How to hook Honeyweel 5 terminal to 2 wire furnace? Connections, Y, G, Rh, Rc, W
I am replacing my old thermostat. The old is a TEMPSTAR, the new is a Honeywell model # RTH7500. When I use the directions I end up with one left over wire. We called the Honeywell hotline, the rep. said to wire it like this: red to R, white to O, Yellow to Y, Blue to C, Green to G, Orange...
I currently have two zones for cooling only and the thermostat wires are red, blue and white. The red is labeled Rc which is easy, the white is labeled W Heat (this doesn't make sense to me) and the blue is labeled cool? What I think I need to do is connect the red to the Rc on the thermostat,...
Hi there honeywell rth 5100b I am getting heat with fan but the ac compressor not coming on for cooling,fan does though I have 5 wires coming out of wall to thermostat White Red Yellow Green Black
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
