Ask Experts Questions for FREE Help !
Ask
    chesmac's Avatar
    chesmac Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 11, 2010, 10:40 AM
    Delta Faucet removal.
    I want to lubricate a 10 - 12 yr. old Delta tub/shower faucet; it's a two part handle with the temp control on top and volume underneath; but can't see how to dismantle it; there are no set screws, just a chrome tip to the plastic handle but I can't get the tip to come off and don't want to pry too hard - is that how to get the thing apart?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Sep 11, 2010, 11:55 AM

    Click on; http://www.plumbingpartsdepot.com/dela23handtub.pdf for two and three handle Delta tub and shower valves. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to replace 'O' rings and Gaskets in Delta Faucet [ 1 Answers ]

My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you

Delta bathtub spout removal [ 5 Answers ]

I am trying to removce a Delta bathtub spoutl There is a small indentation on the bottom of the spout, against the wall, with a plastic tab in it, no allen wrench holes, just the plastic tab. I am guessing it is a slip on connection and have tried pushing that tab left, right, up and forward ...

Delta shower cartridge removal [ 1 Answers ]

What is the secret to removing the entire cartridge? I have the replacement # RP32104. It may be just scale and mineral build up. Approx 5 yrs old

Delta bath cartridge removal [ 3 Answers ]

I have a single handle Delta bath faucet valve whose cartridge needs to be replaced because it is dripping. It is about 4 years old or so. I can find no part number anywhere on it. I got all the parts removed, down to removing the brass collar that holds the cartridge in place. NO GO! I put a...

Delta valve removal/replacement [ 4 Answers ]

:( Hi, I am taking off an old single valve delta shower.( For bath and shower.) I have the handle off and the plastic nut but can't turn off the cap without fear of breaking the assembly. I see no set screw holding the cover or cap on. Ideas? Mikey 91


View more questions Search