I need to reverse the directions of fans on condenser units 208 single phase

ralipstreu Posts: 1, Reputation: 1

New Member

Sep 8, 2010, 06:43 AM

I need to reverse the directions of fans on condenser units 208 single phase

smoothy Posts: 25,490, Reputation: 2853

Uber Member

Sep 8, 2010, 08:10 AM

I don't know that you can without replacing the fan blades themselves to reverse the flow.

Add your answer here.

Check out some similar questions!

Single Phase 208? [ 7 Answers ]

Greetings, I'm about to purchase a Suspended unit heater for a carpentry shop. I'd like to use a service I previously used for a table saw, being 208v 30A, (2 hots at 120(120degs opposed) and a ground). The fixtures I'm looking at, in the catalog, state that they are Single/3 phase 208 or Single...

Difference between 3-phase 208 V and single phase 208 V wiring? [ 2 Answers ]

What's the difference between a single phase and a three phase 208V wiring? Does the first has 2 wire only? Can you also identify the wires as to hot, neutral, and ground? This wiring applies to installing an Air conditioning unit. Thanks.

208 single phase vs 208 3 phase [ 5 Answers ]

How can you have the same 208 voltage at 2 pole single phase And 208 voltage 3 phase, when there is an additional (3rd) wire. Please help.:confused:

208 volt3 phase why to single phase 120 volt [ 4 Answers ]

Supply is from 75 kva transformer, 3 phase delta /y three wire feeding a 30 amp breaker. 100 feet down stream is a junction box that I want to tap and produce a 120 v single phase ( 20 amp CB) supply. The junction box feeds a 6 amp motor