 |
|
|
 |
New Member
|
|
Sep 7, 2010, 07:59 PM
|
|
If a stair has more than 6 treads where is lighting required?
|
|
 |
Uber Member
|
|
Sep 7, 2010, 11:28 PM
|
|
Hi, spiduki1123!
Why are you asking the question, please? It would be helpful to know that. Perhaps this might be concerning something that needs to be according to a certain code?
Don't know...
Thanks!
|
|
 |
New Member
|
|
Sep 8, 2010, 08:38 PM
|
|
Hi Clough:
Thanks for your response I got the question on a home inspector's test; my answer was - at the top and bottom of the stair, however I have no way to know if I'm correct. Yes, I do believe it is a code relating question, but does not know which.
Thanks for your help
|
|
 |
New Member
|
|
Oct 11, 2011, 09:17 PM
|
|
Did you ever find the answer to this question?
If not the answer is in the middle. http://www.inspectapedia.com/interiors/Stair_Codes.htm
|
|
 |
New Member
|
|
Jun 5, 2012, 04:16 PM
|
|
Correct answer from Nachi
Illumination:
•Lighting at the stairs is needed. All interior and exterior stairways should have a means to illuminate the stairs, including both the landings and the treads. Correction and further evaluation is recommended.
•Lighting at the landings is needed. Interior stairways should have a light located at each landing, except when a light is installed directly over each stairway section. Correction and further evaluation is recommended.
•There are missing controls for the lights at the stairway. Interior stairways with at least six risers require wall switches at each floor level, unless the lights are continuously illuminated or automatically controlled. Correction and further evaluation is recommended.
Blake
Florida Hom Inspections
From InterNACHI's advanced tips for inspecting stairways and sample reporting language (U.S.-only version). - InterNACHI http://www.nachi.org/stairwaysusonly.htm#ixzz1wxk8Qgam
|
|
 |
New Member
|
|
Jun 5, 2012, 04:17 PM
|
|
I apologze all
Here is theanswer without the highlights easier to read..
There are missing controls for the lights at the stairway. Interior stairways with at least six risers require wall switches at each floor level, unless the lights are continuously illuminated or automatically controlled.
Blake
F.H.I.
|
|
 |
New Member
|
|
Jun 5, 2012, 04:18 PM
|
|
Inter Nachi specs:
Interior stairways with at least six risers require wall switches at each floor level, unless the lights are continuously illuminated or automatically controlled.
Blake
F.H.I.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Replacing stair treads
[ 2 Answers ]
I am soon to head to my daughters home to help install a floating wood floor and replacement stair treads. The treads will be prefinished Briz cherry. Not sure if the treads they ordered are full thickness or 1/2" that just go over existing tread. The stairs are currently carpeted so I'm sure the...
How do I make my stair treads longer, right know they are only 7 or 8 inches
[ 2 Answers ]
I was wondering how to make my stair treads longer right now they are only about 7 or 8 inches and my foot will not fit on them I have already had someone fall down them due being so small I was wanting to get they to about 10 inches or so without ripping everything out and starting from scratch
Treads on staircase
[ 2 Answers ]
My carpenter tore out our old carpet staircase and rebuilt a new one. He's just about to put the iron balusters on but I just noticed, he didn't place moulding (lip) where the tread and the riser meet. On pics of his work, all of the other staircases he built had the mouldings. I want the...
Installing new stair treads
[ 9 Answers ]
What's is the best way of installing new stair treads over the old ones. Nails or glue?
Thanks
View more questions
Search
|