Trane weathertron baystat 239?

Ramonparker Posts: 2, Reputation: 1

New Member

Sep 5, 2010, 03:36 PM

Trane weathertron baystat 239?

I want to ad a new thermostats . 6030 ritetemo need to get the wires right can you help me

wmproop Posts: 3,749, Reputation: 91

Ultra Member

Sep 5, 2010, 07:11 PM

Tag or lable the wires before removing them from the old tstat

Add your answer here.

Check out some similar questions!

Trane model baystat 239 [ 0 Answers ]

I'm replacing the 239 with Hunter Model 44860. I currently have 2 wires coming to the 239 thermostat, 1 wire has a white, red &green (green not used). 2nd wire has a red,yellow,blue & green.The green goes to G;Red goes to O; white goes to X2 & W. The yellow goes 2 Y; white goes to T; red goes to...

Trane baystat 239 to honeywell th3210d1004 [ 1 Answers ]

I am replacing a Trane Baystat 239 thermostat with a Honeywell TH3210D1004 thermostat. The Trane thermostat is wired is follows: Terminal Color of Wire X2 Black O Orange G Green Y Yellow T Tan R ...

Trane Weathertron Baystat 239 to Honeywell 7600D wiring help [ 1 Answers ]

Whoever can help me with this issue I would greatly appreciate it. I have a Trane Weathertron thermostat and I want to replace it with a Honeywell 7600d programmable thermostat. I have an issue. When I installed the thermostat is only pumped out cold air while in heat mode. I have a heat pump...

Trane Weathertron (Baystat 339) to Honeywell RTH2410 [ 2 Answers ]

I just replaced my old Trane Weathertron (Baystat 339) mercury thermostat with a Honeywell RTH2410. Everything appears to be working fine, but I'm concerned about a few things... I had to tape off the Blue and Tan wires because there was no connections available on the new Honeywell. Also, the...

Trane weathertron 239 to hunter 44860 touch screen [ 3 Answers ]

I have a trane weathertron with a heat pump. I would like to install my new hunter 44860 touch screen thermostat. The wiring is as follows: Trane Green=G Orange=O Black=x2 Yellow=y Brown=T Red=R